For quick and easy home maintenance, trust the Husqvarna 435. This robust gas saw features Smart Start® technology and air purge to deliver best-in-class starting performance.* Our proprietary X-TORQ® engine delivers superior performance, increased fuel efficiency and low emissions. And LowVib® technology makes this saw comfortable to use, even in demanding conditions.
Engine
Chain speed at max power
56.76 fts
Cylinder displacement
40.9 cm³
Output shaft power1
2.2 hp
Clutch engagement speed (±120)
4,300 rpm
Electrode gap
0.02 in
Idling speed
2,900 rpm
Ignition module air gap
0.01 in
Maximum power speed
9,000 rpm
Oil pump type
Fixed flow
Equipment
Recommended bar length, min
13 in
Pitch
.325"
Recommended bar length, max
18 in
Chain type
H30
Bar length
40 cm
Bar length (inch)
16 in
Sprocket type
Spur 7
Gauge
.050"
Dimensions
Weight (excl. cutting equipment)
9.78 lbs
Sound and noise
Sound pressure level at operators ear
102 dB(A)
Sound power level, guaranteed (LWA)
114 dB(A)
Sound power level, measured
113 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle
3.8 m/s²
Equivalent vibration level (ahv, eq) front handle
3.1 m/s²
Lubricant
Oil tank volume
0.53 US pint
Emission
Exhaust emissions (CO₂ EU V)2
813 g/kWh
Quick Details
Sharpen With:
Chain Pitch: 3/8" Low Profile
Bar Tail Mount:
*Note: HP Ratings are obtained from Public sources and Believed to be accurate, but Not Verified by SawSuppliers.com
Was pretty disappointed in the LPX chains that came with my saw. Bought the EXL and EXJ standard and skip config chains, they are more aggressive cutters and run much easier. Only chains I will run right now until Oregon comes up with something better.
I had a problem with my saw I sent an email asking about it and never got a reply. I have since got the problem with the saw taken care of. Hopefully the saw turns out to be as good as everybody says they are.
